TX7-705C-S-ST3 stratum iii smd tcxo cmos 2002/95/ec rohs compliant 14 dec. 10 quartzcom ag quartzco m asia quartzcom usa sales@quartzcom.com sale s-asia@quartzcom.com sa les-usa@quartzcom.com www.quartzcom.com features ? applications: transmission, tdm networks, sdh, sonet, wireless communications, ieee 1588v2, synce, stratum iii, wireless backhaul, metro carrier ethernet, femtocells, picocells ? holdover stability: 0.37 ppm over 24 h ? overall stability: 4.60 ppm including 20 years aging ? output signal: cmos parameter specification frequency range 9.83040 ~ 32.0 mhz standard frequencies 10.0, 12. 80, 16.3840, 19.440, 20.0, 25.0, 26.0 & 32.0 mhz frequency stability: 4.60 ppm overall stability including 20 years aging vs. temperature 0.28 ppm -40 ~ +85 c vs. aging 3.0 ppm 20 years holdover stability ( 1 ) 0.37 ppm over 24 hours frequency tolerance ex. factory 0.50 ppm @ +25 c supply voltage +3.3 v or +5.0 v 5 % supply current < 6 ma output signal cmos output load 15 pf 5 % tri-state function pin #9 high or open pin #6 ? oscillation pin #9 low pin #6 ? high impedance phase noise @ 12.8 mhz carrier frequency -145 dbc/hz @ 10 khz operating temperature range 0 ~ +70 c indoor use -40 ~ +85 c outdoor use storage temperature range -55 ~ +125 c packaging units tape & reel 500 or 1?000 pieces tape only < 500 pieces customer specifications on request ( 1 ) including: frequency stability, vs temperature, supply change of 5 % and aging over 24 hours pin function # 1 gnd # 5 gnd # 6 output # 9 tri-state or not connected # 10 vdc do not contact #2, #3, #4, #7 & #8 example for soldering pattern do not design any conductive path between the pattern example for ir reflow soldering temperature
|